Cushion mount foam flexo plate mounting tape for photopolymer plates in flexographic printing
Description
Seagull-1238 is a double-coated foam tape, designed specifically for mounting photopolymer plates in flexographic label printing. The medium-hard foam makes this the ideal compromise in printing solids, line work and screen.
Applications
For mounting photopolymer plates with a thickness of 1.14 mm (0.045") or 1.70 mm (0.067") in flexographic label printing
Features
Highly compressible foam, with superior recovery behavior for excellent print quality Long lasting recovery characteristic for extended and high speed print runs Low thickness tolerances for quick print preparation and reduced waste High bonding on open side to steel cylinder or sleeve to avoid plate movement High bonding to plate to avoid edge lifting or plate movement Non increasing bonding power for easy repositioning and especially for easy demounting of plate and tape Very cohesive adhesive structure for demounting without adhesive residues The structured PP-liner prevents the formation of air pockets when plate mounting
Technologys
Model Number | Seagull-1238 | Seagull-1250 |
Performance comparable |
Tesa 52016 , 3M 1015 |
Tesa 72024 , 3M 1020 |
Backing material | PE foam with film lamination | PE foam with film lamination |
Total thickness | 430 µm | 550 µm |
Size | 460mm*25m or custom | 460mm*25m or custom |
Type of adhesive | Tackified acrylic | Tackified acrylic |
Type of liner | PP | PP |
Color | White | White |
Hardness | Medium | Medium |
Thickness category | 380 µm | 500 µm |
Packing
Contact HaiXiang Tape Supplier